Low Oil Bleed Elastomeric Thermal Silicone Pads

Oil bleed is a serious problem in elastomeric thermal silicone conductive pads. The components of the oil bleed and the effect of the silicone chemical parameters on the amount of oil bleed have been determined. The main components of oil bleeds are the uncrosslinked silicones in the cured resins, which include the unreacted silicone materials and the macromolecular substances produced by the hydrosilylation reaction. Cured resins with a high crosslinking density and a high molecular weight of vinyl silicone residues had a lower amount of oil bleed. In addition, a low Si-H content also reduced the amount of oil bleed.

SinoGuide low oil bleed thermal transfer pads are soft and conformable to provide maximum wet out for effective heat transfer and vibration damping for your most demanding thermal applications such as LED and consumer electronic device assembly.

Fortunately we draw you up here to get know about this. With years by years, this problem is still out there in the market. Now you gonna forget about this eventually as we’re going to present our adequate solutions for you and it’s been widely qualified by our big customer portfolios in multiple industries, for your assurance. Here is the one, TCP110U.

Here’s the comparison pictures with similar type sample from one famous supplier in the market so you can have a more clear picture of our innovations and devotions.

In the meantime, we did some Outgassing test by 3rd party laboratory – SGS/CTI and the results for TML & CVCM is way much under the standards (TML≤1%; CVCM≤1%. In compliant with ASTM E595 test standards). Reports can be provided if any support in need. Look forward to be your technical partner and help you out.

Welcome your floods of emails & calls!